Automotive Relays
Plug-in Mini ISO Relays
Power Relay B (Continued)
Other Data (continued)
Terminal type
Cover retention
axial force
Accessories
For details see datasheet
plug-in, QC
Connectors for Mini ISO Relays
150N
200N
200N
pull force
push force
Terminal retention8)
pull force
100N
100N
push force
resistance to bending
force applied to side
torque
Weight
Packaging unit
6) Refers to used mateials.
10N
10N
0.3Nm
approx. 35g (1.2oz)
200 pcs.
7) No change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly higher.
8) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
Terminal Assignment
NO
1 form A, NO
NOR
NO_2x87
1 form A, 1 NO (2x87)
NOR_2x87
1 form A, 1 NO (2x87) with resistor
1 form A, NO with resistor
85
87 87
85
87 87
85
87
30
85
87
86
30
86
30
86
86
30
NOD_2x87
1 form A, 1 NO (2x87) with diode
CO
1 form C, CO
COR
1 form C, CO with resistor
COD
1 form C, CO with diode
85
87 87a
85
87 87a
85
87 87a
85
87 87
86
30
86
30
86
30
86
30
2
06-2011, Rev. 0611
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
MACOM [ Tyco Electronics ]
