SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
SGRP-1
C
L3.5
(L0.140)
Green
38.3
(1.510)
SGRP-2
C
Red
37.7
(1.485)
SGRP-3
D
Blue
44.5
(1.750)
SGRP-4
D
Yellow
45.5
(1.790)
These products are tested to RB109.
Ball
Color
Product Dimensions
øA
3.10.2
(0.1250.008)
3.90.2
(0.1550.008)
5.350.3
(0.2100.012)
7.150.3
(0.2800.012)
øB
26.02
(1.0250.079)
23.52
(0.9250.079)
25.53
(1.000.118)
25.03
(0.9850.118)
Copper Cross Section
Min.
Max.
2
2
mm (CMA)
mm (CMA)
0.7 (1400)
2.4 (4800)
2.0 (4000)
3.5 (7000)
7.5 (15000)
4.0(8000)
9.0(18000)
15.0(3000)
Bundle ø
øD
M1
max
(M0.04)
4.0
15
(0.160)
(0.590)
6.0
15
(0.235)
(0.590)
8.5
15
(0.335)
(0.590)
10.5
15
(0.410)
(0.590)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER:
TYPE Sn60 per ANSI-J-STD-006.
FLUX:
TYPE ROM1 per ANSI-J-STD-004.
3. CONICAL SPRING: Square copper wire.
4. END CLOSURE BALL: Tinted glass. Color: see table.
APPLICATION
1. These controlled soldering devices are designed stub splicing of stranded wires with bare copper conductor having an insulation
rated for 85C minimum.
2. Temperature range: class 3A, -40C to +125C.
Vibration range: class 1 (body).
Seal range: class 0 (seal porous or no seal).
3. For installation procedure and application equipment
consult, RPIP-820-00.
For best results, prepare the cable as shown:
* A trademark of TE Connectivity
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
ANGLES: N/A
TE Connectivity reserves the right to amend this
0.00 N/A
drawing at any time. Users should evaluate the
0.0 N/A
ROUGHNESS IN
suitability of the product for their application.
0 N/A
MICRON
DRAWN BY:
CAGE CODE:
REPLACES:
DCR NUMBER:
TITLE:
SOLDERGRIP*
STUB SPLICE
DOCUMENT
NO.:
SGRP-X
DATE:
DOC ISSUE:
15-Apr-11
PROD. REV.:
SCALE:
SIZE:
6
SHEET:
M. FORONDA
06090
D981339
D020135
SEE TABLE
None
A
1 of 1
Print Date: 9-May-11
If this document is printed it becomes uncontrolled. Check for the latest revision.