HX-SCE Low fire hazard heat-shrinkable wire identification sleeves
Technical Information
Print Method/Ribbon:
T312M-PRINTER with 1966-RIBBON or
T212M-PRINTER with T200-1966-RIBBON
Service Temperature
Minimum Shrink Temperature
Colors:
-30˚C to +105˚C (-22˚F to +221˚F)
136˚C (275˚F)
White or yellow.
Other colors available on request.
Flammability:
Self-extinguishing -
(ASTM D2671 Procedure B).
Oxygen Index (BS6853: Pass 34% Min.) -
(BS EN ISO 4589-2 [1999]).
(AFNOR NF F 16-101 Class 12).
Dripping Classification ST2 -
(DIN 5510-2)
Smoke:
A0-0.017 Max. (BS 6853 [1999]
Annex D [D.8.3] Small scale test
Smoke Index Determination (IF)
Maximum 0, Smoke Class F1 -
(AFRNOR NF F 16-101-1988 Smoke Index)
Toxicity:
R < 1 - (BS 6853 [1999] Annex B -
AFNOR NF X 70-100 Determination of
weighted summation of toxic fume, mass
based method)
LUL Toxid Fume: No. Halogens, No. P, S or
N sources above trace level -
(LUL E1042: A6 [2002]) -
London Underground Standard 2-01001-002,
section 5.2.3 Chemical composition/toxicity)
Toxicity Index = 0.34 -
(CEI 20-37-7-09-1997 Determination of
toxicity index of gasses from combustion of
organic material
Dielectric Strength:
Water Absorption
Copper Mirror Corrosion:
Longitudinal Change:
Tensile Strength:
Ultimate Elongation:
Secant Modulus:
UL Resistance:
15V/mm minimum.
11% maximum after 24 hours at 23C (73˚F)
8% maximum after 16 hours of 150˚C (302˚F)
+5% to -10%.
7MPa minimum.
80% minimum.
200MPa mimum at 2% elongation.
Tensile strength >90% & ultimate elongation
>40% or original value after 1000 hours
(ASTM G53: UVA [100% dry cycle]; UVB
[8 hours dry/4 hours wet cycle]).
Print Permanence:
ADHERENCE - Meets the requirements of
SE AS81531 4.6.2 (50 rubs).
FLUID RESISTANCE - Meets the
requirements of MIL-STD-202 method 215J.
Catalog 1654227
Revised 04-07
www.tycoelectronics.com
Dimensions not italicized are
in millimeters while dimensions
in inches are italicized.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Heat Shrink/Cable Markers
11
Wire and Harness ID Products
Heat-Shrink/Cable Markers
MACOM [ Tyco Electronics ]
