RAYCHEM Tubing Products
Model 105
Tabletop Tunnel Oven
Product Facts
I Closed-loop speed and
2
temperature control
I Continuous controlled
process
I Adaptable for different
applications
I CE approved for worldwide use
I Heater operation and over-
temperature alarm lights
the heat zone. The upper
chamber is equipped with
adjustable heat shields to
maximize the oven heating
efficiency for various appli-
cations.
drive controller and DC
drive motor ensure constant tubing. Heat output and
or adhesive-lined
Applications
The Model 105 Tunnel Oven
is a reliable and versatile
process heater which pro-
vides a controlled process
for a wide variety of heat-
shrinkable products.
conveyor speed at any
potentiometer setting from
100 to 999 [0.2 to 5.0 feet
per minute], for precise
heating of assemblies.
drive speed can be con-
trolled to accommodate a
wide variety of products
and substrates.
Controlled Heating Zone
Safety Features:
The M105 is designed as
an integrated modular unit.
Assemblies are placed on
the entry section of a mesh
conveyor belt, transported
through the heating chamber,
across a bank of cooling
fans then discharged from
the rear of the conveyor.
Minimal Skill Requirements
The Model 105 Tunnel Oven
has two stamped foil heat-
ing elements that are manu- the entry section of the
• Emergency Stop
The open loading area of
• Automatic cool-down
circuit to extend the life of
the components
factured to a strict wattage
specification. Consistent
temperatures (ambient to
700ºC) are controlled by a
thermocouple embedded
into the upper heating ele-
ment connected to a
closed-loop temperature
controller. An alarm light
illuminates whenever the
actual heating element tem-
perature varies from the set
point temperature.
M105 requires that the
operator simply place an
assembly on the mesh con-
veyor belt within the effec-
tive width of the heat zone
and collect it at the oppo-
site end.
• Over-temperature switch
that shuts off all power in
the event of an overheat
condition
The M105 has two upper
heating chamber height
positions, 54 mm [2.11 in]
and 98 mm [3.86 in].The
position is adjusted by
removing the pivot pins and
relocating them in the bear-
ing stands.
• Lockout on temperature
and speed controllers to
prevent unauthorized
changes
Versatility
The processor is designed
to process a broad range of
heat-shrinkable products up
to 76.2 mm [3 in] in diame-
ter and infinite length. The
infrared energy source is
well-suited to efficient pro-
cessing of either single-wall
• Audible alarm indication
of a heater failure
• Circuit breaker for current
overload
The upper chamber is
Conveyor Speed Control
cantilevered to permit pro-
cessing of assemblies that
require only a portion of the
assembly to pass through
The conveyor speed is pre-
cisely set by a 3-digit
potentiometer. The SCR
Available in:
Americas
Europe
Asia Pacific
I
I
I
2-15
9-1773447-9
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
reference purposes only.
Specifications subject
to change.
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666