Note: All part numbers
are RoHS Compliant.
AMP Circular Connectors for
Commercial Signal and Power Applications
Signal Contacts
Spring,
Stainless Steel
+.ꢀꢀ1ꢀ
–.ꢀꢀ2ꢀ
Type III+, Crimp, Snap-In
[.ꢀ625
[1.588
Dia.
+0.025
–0.051
Spring, Stainless Steel
]
Pin Body
Ferrule, Brass,
Nickel Flash
.39ꢀ
[9.91]
Min.
Pin
.113 Max.
[2.87] Dia.
Pin
.ꢀ1ꢀ
.53ꢀ
[13.46
Socket
0.25
]
Application Tooling—Pages 76-79
Technical Documents
114-10004 Application Specification
108-10042 Product Specification
Material and Finish — See chart.
Contact Body—Brass or phosphor bronze
Retention Spring—Stainless steel
Socket
‡Single contact, free-air test current is not to be construed as contact rating current. Use only for testing.
Refer to contact current carrying capability information on page 8.
Contact Size 16—Pin Diameter .062 [1.57] (Test Current, 13 Ampere)‡
Wire Size
Strip Form
Loose Piece
Contact No.
Tooling Part No.
Ins.
Dia.
Contact
Finish
Range
Contact No.
Loose Piece
Strip Form
Range
AWG
mm2
Pin
Socket
Pin
Socket
Hand Tool
Applicators
567867-1***
Gold/Nickel2
788085-3
788088-2
—
—
.ꢀ15-.ꢀ3ꢀ
30-28
0.05-0.09
90716-1
or 567947-1***
0.38-0.76
Sel. Gold/Nickel3
Bright Tin
788085-1
1-66425-2
66425-7
66425-8
66393-7
66393-8
1-66106-5
66106-7
66106-8
—
2-66102-5
66102-8
66102-9
2-66102-2
—
788088-1
1-66424-1
66424-7
66424-8
66394-7
66394-8
1-66108-5
66108-7
66108-8
66108-1
3-66104-0
66104-8
66104-9
2-66104-3
66104-1
788085-4
—
66429-3
66429-4
—
66406-4
1-66107-1
66107-3
66107-4
—
1-66103-8
66103-3
66103-4
1-66103-2
—
788088-3
—
66428-3
66428-4
—
66405-4
1-66109-7
66109-3
66109-4
66109-1
1-66105-9
66105-3
66105-4
1-66105-3
66105-1
□
or 680602- ***
.ꢀ4ꢀ-.ꢀ6ꢀ1
1.02-1.52
.ꢀ14-.ꢀ3ꢀ1
0.36-0.76
Gold/Nickel2
Sel. Gold/Nickel3
Gold/Nickel2
Sel. Gold/Nickel3
Bright Tin
91515-16
90225-26
466598-□***
30-26
26-24
0.05-0.15
466585-3***
91515-16
or
58495-1*
466321- ***
□
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
.ꢀ35-.ꢀ551
0.89-1.40
0.12-0.2
0.2-0.6
or
466908-2***
Gold/Nickel2
91515-16
or
58495-1*
466323-□***
or
466907-2***
.ꢀ4ꢀ-.ꢀ8ꢀ1
1.02-2.03
Sel. Gold/Nickel3
Sel. Gold/Nickel4
Bright Tin
24-20
466383-4***
or 466979-1***
or 567363-□***
1-66564-2
1-66563-1
66566-7
66565-7
.ꢀ6ꢀ-.12ꢀ5
1.52-3.05
91542-16
Sel. Gold/Nickel3
66564-8
66563-8
66566-4
66565-4
Bright Tin
1-66332-4
66332-7
66332-8
—
1-66331-4
66331-7
66331-8
66331-2
1-66400-0
66400-3
66400-4
—
1-66399-0
66399-3
66399-4
66399-2
91523-16
or
466324- ***
□
Gold/Nickel2
.ꢀ8ꢀ-.1ꢀꢀ1
2.03-2.54
or
Sel. Gold/Nickel3
Sel. Gold/Nickel4
90225-26
466942-1***
1-66098-9S
1-66098-8
66098-8
66098-9
66098-6
1-66359-4
1-66359-5
66359-9
1-66359-0
1-66359-2
—
Bright Tin
1-66100-9
1-66099-5
1-66101-9
91505-16 or
91523-16 or
58495-1*
466325- ***
□
.ꢀ8ꢀ-.1ꢀꢀ1
18-16
18-14
0.8-1.4
0.8-2.0
Gold/Nickel2
Sel. Gold/Nickel3
Sel. Gold/Nickel4
66100-8
66100-9
—
66099-3
66099-4
66099-1
1-66361-2
66361-7
66361-3
66361-4
66361-8
—
66101-3
66101-4
—
1-66360-2
66360-7
66360-3
66360-4
66360-8
66360-1
or
2.03-2.54
466906-1***
1-66358-6
1-66358-8
66358-9
1-66358-0
1-66358-3
66358-1
66598-9
1-66598-0
66598-2
Bright Tin
Gold/Nickel2
.ꢀ8ꢀ-.1ꢀꢀ1
□
466326- ***
91519-16
91521-16
or
2.03-2.54
Sel. Gold/Nickel3
Sel. Gold/Nickel4
466923-2***
466958-1***
or
.11ꢀ-.15ꢀ5
2.79-3.81
Bright Tin
66597-8
66597-2
66602-8
66602-2
66601-9
66601-2
Sel. Gold/Nickel3
□
567364- ***
1Overall insulation crimp diameter, including crimp barrel, must not
exceed .125 [3.18].
5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr. 23-
24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
6To use with the 626 Pneumatic Tool: remove crimping head from Straight
Action Hand Tool (SAHT), order SAHT Adapter Part No. 2172ꢀ1-1,
Adapter Holder Part No. 3563ꢀ4-1 (with ratchet) or 189928-1 (without),
and Power Unit Part No. 189721-1 (hand actuated) or 189722-1 (foot
actuated).
SStandard reeling of strip form contacts.
*Commercial PRO-CRIMPER II hand tool for field repair only. Note:
Die Set can be adapted for use with 626 Pneumatic Tool System.
Insertion Tool Part No. 91ꢀꢀ2-1 (for insulation diameters .070 [1.78]
or less), No. 2ꢀꢀ893-2 (for insulation diameters .090 [2.29] max.).
Extraction Tool Part No. 3ꢀ5183. (Instruction Sheet 408-1216)
***Call Technical Support for Machine Applicator Part Numbers.
2.000015 [0.00038] gold in the mating area over .000050 [0.00127]
min. nickel.
3.000030 [0.00076] gold in the mating area, with gold flash on
remainder, over .000050 [0.00127] min. nickel.
4.000030 [0.00076] gold in the mating area, with gold gradient on
remainder, over .000050 [0.00127] min. nickel.
17
Catalog 82021
Revised 7-07
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
South America: 55-11-2103-6000
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
www.tycoelectronics.com
MACOM [ Tyco Electronics ]
