Performance Labels
RMK-6 Computer printable epoxy coated labels
RMK-6 is a computer printable labelstock with outstanding fluid
and abrasion resistance, designed to be printed by impact dot
matrix printers. When heat-cured after printing, its unique heat
reactive epoxy surface “locks in” the image to combine the
versatility and convenience of on-site printing with performance to
meet the toughest conditions. A high performance acrylic
adhesive ensures simple installation while maintaining excellent
adhesion.
Typical applications are rating plate labels, component
identification, and pipe and cable wraparound markers. Outdoor
use is not recommended.
Features and benefits
ꢀ
Printable by dot matrix printers
ꢀ
Excellent fluid and abrasion resistance without an overlay
ꢀ
High performance acrylic adhesive
ꢀ
Low fire hazard properties
ꢀ
Indoor use only
Temperature rating
Operating temperature range
Wiring marking –40°C to +85°C
–40°F to +185°F
Panel marking
–40°C to +105°C
–40°F to +221°F
Excursion temperature
Storage conditions
+200°C for 2 hours
Unopened
Opened
12 months at temperatures not exceed-
ing +35°C (+95°F).
6 months at temperatures not exceed-
ing +25°C (+77°F)
and 80% relative humidity
Curing
4 - 6 minutes at 160°C
in an air circulating oven.
Specifications/approvals
Tyco Electronics
RW 2520
TTDS-032
Industry
UL
MH17259 Group PGGU2
Printer information
Tyco Electronics printer
Tyco Electronics ribbon
AM6310 (dot matrix)
1892BK04 (dot matrix)
Part numbering system
RMK6 8.5
fProcnmLabsel
Label height (mm)
Product family
40
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
C. America: 52-55-5-729-0425
UK: 44-141-810-8967
MACOM [ Tyco Electronics ]
