Heat-Shrink/Cable Markers
TMS-SCE Military grade heat shrinkable wire identification sleeves
TMS-SCE marker sleeves are designed to meet the wire and cable
marking needs of manufacturers with high performance
requirements. Made from durable, flame retardant, radiation-
crosslinked heat-shrinkable polyolefin, TMS-SCE marker sleeves
can be used in a wide variety of applications. All TMS-SCE meet the
performance requirements of SAE-ASM-DTL-23053/5 class 1.
TMS-SCE-2X meets all of the requirements of SAE-AMS-DTL-
23053/5 classes 1 and 3. The marks are permanent immediately
after printing and remain legible even when exposed to abrasion,
aggressive cleaning solvents, and military fuels and oils. The
sleeves meet the mark permanence requirements of SAE
AS81531 4.6.2 and MIL-STD-202 both before and after
shrinking.
Both 2:1 and 3:1 shrink ratios are available. The 2:1 products
provide a thick, rugged sleeve wall and are particularly easy to
handle. The lightweight 3:1 products provide extremely fast
shrinking and cover a wider range of wire diameters, thus
simplifying inventory.
Temperature rating
Operating temperature range
Minimum recovery temperature
Maximum storage temperature
–55°C to +135°C
+85°C
–67°F to +275°F
+185°F
The marker sleeves are designed to be printed by computer-driven
dot matrix or thermal transfer printers, providing several
advantages in terms of reduced errors, cycle time and cost.
+40°C
+104°F
Specifications/approvals
Supplied in a thin, flat “ladder” format, the sleeves are held
horizontally between two hole-punched polyester strips. This
configuration feeds directly from the storage box into a Tyco
Electronics recommended printer. Tyco Electronics recommended
ribbons should always be used. The ladder format provides
automatic kitting of the marker sleeves in the desired sequence. A
standard heat gun with reflector is used to shrink the sleeves onto
the wire or cable.
Tyco Electronics
RW 2511
TTDS-023
Military
SAE-AMS-DTL-23053/5 class1 and 3 (TMS-SCE-2X)
SAE-AMS-DTL-23053/5 class 1 (TMS-SCE)
SAE AS81531 4.6.2, MIL-STD-202 Method 215J
Industry
UL Recognized – Standard 224, file E35586
(TMS-SCE-2X is UL224-VW1 rated. TMS-SCE is UL224-
all tube flame test rated)
CSA Certified – File 31929
Features and benefits
Printer information
ꢀ
Permanent identification sleeves
Tyco Electronics printer
AM6310 (dot matrix)
ꢀ
Computer-printable
T200 Series (thermal transfer, low volume)
T312M (thermal transfer)
ꢀ
Lightweight for aerospace applications
Tyco Electronics ribbon
1892BK04-RIBBON (dot matrix)
ꢀ
Military specification material and print performance
TMS-101-RIBBON-4RPSCE (thermal transfer for T208M)
TMS-RJS-RIBBON-4RPSCE (thermal transfer for T312M))
ꢀ
2:1 and 3:1 shrink ratio
ꢀ
CSA Certified
ꢀ
UL Recognized, VW all flame tubing test rated
Part numbering system
TMS-SCE - 2X -1K-1/
- 2.0-S1-9
ꢀ
Quick recovery for heat sensitive areas
8
Color (white or yellow)
Scoring (optional)
Sleeve length
(2.0" nominal) (omit for 2X)
Inside diameter, as
supplied ( inches)
Standard Pack
(1,000 pieces)
tHhSi/nbClMakers
2X is optional (2:1 shrink
ratio: if left out, product
will be 3:1)
Product family
4
Catalog 1654227
Revised 04-07
Dimensions not italicized are
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
in millimeters while dimensions reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
in inches are italicized.
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-141-810-8967
MACOM [ Tyco Electronics ]
