AMP Dynamic Series Connectors
Dyna-Tap Connectors (Wire-to-Panel and Wire-to-Wire)
Product Facts
I As many Dyna-Tap
Connectors will be fixed on
casings where dust
protection will be needed,
dust covers are incorporated
into the design. With the
dust cover, this connector
can be applied in various
environments
Many pieces of FA
Product Lineup
Performance Characteristics
equipment are produced by
assembling sub-units with
divided functions in the final
assembly line. Power for
each sub-unit of conven-
tional equipment is
Voltage Rating — 250 VAC
Current Rating — 8A (18-position,
with AWG#14)
Position — 6 pos. x 3 = 18 pos.
Durability — 500 cycles
Free-hanging type and
panel mount type are
available. The part number
of the mating connector is
1-178288-6.
Applications
branched from the power
supply bus line over a
printed circuit board. In
order to save valuable
printed circuit board space,
Tyco Electronics has
Technical Document
Product Specification
108-5754
I Power taps in elevator
towers
I Power taps for power
protective relays
developed Dyna-Tap
I Power taps among sub-
units of semiconductor
producing equipment
Connectors from which
power can be tapped
without printed circuits.
I Power supplies for
equipment on production
lines
Dyna-Tap Connectors are a
part of Dynamic Series,
which are developed as
power supply connectors.
Dyna-Tap Connectors are
optimized for branching
power from the power sup-
ply bus line.
In order to cope with three
power systems, which are
the most popular in the
industry, 6-position connec-
tors are specified.
108
Catalog 1242132
Revised 5-07
Dimensions are in millimeters
unless otherwise specified.
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
reference purposes only.
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Specifications subject
to change.
www.tycoelectronics.com
UK: 44-8706-080-208
MACOM [ Tyco Electronics ]
