RAYCHEM Tubing Products
HL1910E/HL2010E
Light Duty Heating Tool
Product Facts
I Light duty, portable hot air
heater
2
The HL2010E and HL1910E The HL2010E tool is
A bench stand allowing use
of both the HL2010E and
the HL1910E as a bench
tool is available as an
hot air heat guns are
designed to work with a
standard line voltage
switched on and off at the
three-stage switch and the
temperature can be contin-
uously adjusted over a
(120V) on a wide variety of
Raychem heat-shrinkable
products. These tools are
suitable for occasional use
and are not recommended
for applications requiring
high duty cycles. Both tools
supply forced hot air with
an adjustable heat setting
to meet the requirements of
many different installation
situations. A three position
switch controls the air flow
(150/300/500 l/min)
option. Only two reflectors
range of 50°C-630°C by the are required to cover most
pushbuttons. The tempera-
ture can be increased or
reduced by 10°C steps. An
LCD display shows the
actual temperature.
applications of heat-shrink-
able tubing and SolderSleeve
terminations.
There is an adaptor avail-
able, which allows the use
of PR type reflectors.
The HL1910E tool is
switched on and off at the
two-stage switch and the
temperature can be contin-
uously adjusted over a
range of 50°C-600°C at the
thumbwheel (the numbers
on it serve as guide only,
1 means 50°C and max.
temperature of 600°C is
attained at 9).
Available in:
Americas
Europe
Asia Pacific
I
I
I
2-3
9-1773447-9
Dimensions are in inches and
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Germany: 49-6251-133-1999
China: 86-400-820-6015
Japan: 81-44-844-8013
CIS WR 08/2011
millimeters unless otherwise
Canada: 1-905-475-6222
Mexico: 52-55-1106-0800
specified. Values in brackets
are metric equivalents.
te.com
L. & S. America: 54-11-4733-2200
UK: 44-800-267-666
MACOM [ Tyco Electronics ]
