Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
(Continued)
Max. load DC breaking capacity
6) Without components in parallel.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Load dump test
ISO 7637-1 (12VDC), test pulse 5
ISO 7637-2 (24VDC), test pulse 5
500V
rms
500V
rms
500V
rms
Vs=+86.5VDC
Vs=+200VDC
EU RoHS/ELV compliance
compliant
Ambient temperature DC coil
-40 to +125°C
Protection to heat and fire
UL94-HB or better
7)
Climatic cycling with condensation
EN ISO 6988
6 cycles, storage 8/16h
Temperature cycling
IEC 60068-2-14, Nb
10 cycles, -40/+85°C (5°C/min)
Load limit curve 1: arc extinguishes during transit time (CO contact).
Damp heat cyclic
Load limit curve 2: safe shutdown, no stationary arc (NO contact).
IEC 60068-2-30, Db, Variant 1
6 cycles, upper air temp. 55°C
Load limit curves measured with low inductive resistors verified for 1000 switching events.
Damp heat constant
IEC 60068-2-3, Ca
56 days
Category of environmental protection,
IEC 61810
RTI – dustproof, RT III – sealed
Degree of protection, IEC 60529
IP54 (dustproof), IP67 (sealed)
Corrosive gas
Coil Data
IEC 60068-2-42
10±2cm
3
/m
3
SO
2
, 10 days
Rated coil voltage
12/24VDC
IEC 60068-2-43
1±0.3cm
3
/m
3
H
2
S, 10 days
Vibration resistance (functional)
Coil versions, DC coil
IEC 60068-2-6 (sine sweep)
10 to 500Hz > 5g
8)
Coil
Rated
Operate
Release
Coil
Rated coil
6)
6)
code
voltage
voltage
voltage
resistance
power
Shock resistance (functional)
VDC
VDC
VDC
Ω±10%
W
IEC 60068-2-27 (half sine)
11ms >20g
8)
052
12
7.2
1.6
90
1.6
Drop test, free fall
053
24
14.4
3.2
324
1.8
IEC 60068-2-32
1m onto concrete
056
24
16
4
268
2.1
Terminal type
plug-in, QC/PCB
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Cover retention
Coil operating range
axial force
150N
pull force
150N
TE0701-J1
push force
150N
Terminal retention
pull force
100N
push force
100N
resistance to bending, force applied to front
9)
10N
resistance to bending, force applied to side
9)
10N
torque
0.3Nm
Weight
approx. 35g (1.2oz)
Does not take into account
Packaging unit
the temperature rise due to
plug-in/PCB
315 pcs.
the contact current
bracket
plug-in with
200 pcs.
E = pre-energization
materials.
7) Refers to used
8) No change in the switching state >10μs. Valid for NC contacts, NO contact values
significantly higher.
9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal
must not have moved by more than 0.3mm.
Other Data
Accessories
Does not take into account the temperature rise due to the contact current E=pre-
energization..
For details see datasheet Connectors for Mini ISO Relays
2
06-2012, Rev. 0612
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
MACOM [ Tyco Electronics ]
