108-98001 Rev. M
AXICOM Signal Relays
IM Relay
High Frequency Data
IM-A / IM-B
50 Ω
IM / IM-D / IM-E
IMC
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
RF Characteristics
max. 2 pF
max. 2 pF
max. 1 pF
50 Ω
50 Ω
Isolation at 100 MHz / 900 MHz
Insertion loss at 100 MHz / 900 MHz
V.S.W.R. at 100 MHz / 900 MHz
- 33.0 dB / - 13.5 dB - 37.0 dB / - 18.8 dB - 35.0 dB / - 13.3 dB
- 0.06 dB / - 1.00
dB
- 0.03 dB / - 0.33
dB
- 0.04 dB / - 0.40
dB
1.10 / 2.00
1.06 / 1.49
1.04 / 1.33
General Data
Operate time at Unom typ. / max.
Reset time (latching) at Unom , typ. / max.
Duration of set / reset pulse (latching) min.
Release time without diode in parallel (non-latching),
typ. / max.
1 ms / 3 ms
1 ms / 3 ms
10ms*
1 ms / 3 ms
Release time with diode in parallel (non-latching),
typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
3 ms / 5 ms
1 ms / 5 ms
50 operations/s
-40 °C ... +85 °C
< 150 K/W
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
125 °C
20 G
10 to 500 Hz
50 G (function)
500 G (damage)
Shock resistance, half sinus, 11 ms
Shock resistance, half sinus, 0.5 ms
Degree of protection / Environmental protection
Needle flame test
immersion cleanable, IP 67 / RT V
application time 20 s, no burning and glowing
Mounting position
Processing information
Weight (mass)
any
Ultrasonic cleaning is not recommended
max. 0.75 g
Terminal surface
NiPdAu
Moisture sensitive level
(JEDEC J-STD-020D) - SMD types
MSL 3
Resistance to soldering heat
265 °C / 10 s
* Duration may be shorter depending on pulse shape, voltage applied and ambiente temperature
All data refers to 23 °C unless otherwise specified.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
23 of 28
TE [ TE CONNECTIVITY ]
