L U M IN IS
1
2
3
Pole mount
Specification
PELICAN
PL30P
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with a
5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Multi faceted twin reflector assembly can tilt and slide along pole
side, to maximize desired performance on field.
A locking cast aluminum assembly is provided to secure adjusted
position of reflectors.
Multi faceted reflector panels are painted with a textured white
coating applied on both faces. The white enamel textured finish over
the reflective surface insures optimal lighting performance and
brightness control.
- Pulse rated porcelain socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast, installed on a tray with a quick
disconnect assembly.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - Isolated and sealed extruded aluminum ballast housing
2 - Specular aluminum reflector.
3 - Cast aluminum luminaire housing with heat dissipation fins.
4 - Cast aluminum sealed removable glass frame, with perimeter
memory retention embedded silicone gasket.
5 - Tempered clear glass lens .
4
5
Please refer to page 145
for listing of matching poles
15”
Twin mount
Add suffix
- 290
(EPA: 1.28 )
40”
7”
Please refer to page 79
for matching poles listing
Triple mount
42” Add suffix
- 320
(EPA: 2.09)
6” x 6”
extruded aluminum ballast housing
18”
Photometry
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
Certification
UL. Wet Location.
Mounting / EPA
Max. weight: 30 lbs EPA: .091
Installation:
Please refer to page 147
for listing of matching poles
90
60
30
Model#
Light source selection
MH (ED17)
M70
M100
M150
M175
Voltage
120 V
Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
480 V
Finish
(Refer to color chart)
Standard selection
WHT:Snow
white
BKT:
Jet black
BZT:
Bronze
GRT:
Titanium gray
DGT:
Gun metal
CHT:
Champagne
MST:
Matte silver
GNT:
Forest green
Optional colors
CS:
Custom color
RAL:
RAL# color
FS:
PH1:
PH2:
QS:
QRS:
Options
Electrical
Fuse
120/277V photo cell
347V photo cell
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
PL30P
*
M250 (ED18)
Mog. base
HPS (ED17)
H70
H100
H150
*
H250 (ED18)
Mog. base
(Lamps by others)
* Lamp operation requires
M250 ANSI code M58
H250 ANSI code S50
Luminaires may be altered for improvements or discontinued without prior notice.
LUMINIS
[ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS
[ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954
.
717
.
4157
Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev: Jan.2008
Page
77
LUMINIS [ LUMINS INC. ]
