L U M IN IS
1
2
3
Wall mount
Specification
PELICAN
PL25W . PL25W-UP
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with a
5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
- Multi faceted twin reflector assembly can tilt and slide along pole
side, to maximize desired performance on field.
A locking cast aluminum assembly is provided to secure adjusted
position of reflectors.
Multi faceted reflector panels are painted with a textured white
coating applied on both faces. The white enamel textured finish over
the reflective surface insures optimal lighting performance and
brightness control.
- Pulse rated porcelain socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast, installed on a tray with a quick
disconnect assembly.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
1 - 11 ga. galvanized pressure mounting plate.
2 - Isolated and sealed extruded aluminum ballast housing.
3 - Cat aluminum luminaire housing with heat dissipation fins.
4 - Specular aluminum reflector.
5 - Cast aluminum sealed removable glass frame.
6 - Tempered clear glass lens.
PL25W:
PL25W-UP:
Wall down light luminaire
Wall up light Luminaire.
4
5
6
PL25W-UP
15”
7”
Up light luminaire
Mounting
Photometry
2 5/16”
4 5/16”
6” x 6”
extruded aluminum ballast housing
18”
Certification
UL. Wet Location.
Mounting
Max. weight: 30 lbs
Installation: Connects to a standard 4” electrical
box with 3 1/2” c/c mounting holes.
(by others ) additional separate mounting
holes are provided with wall plate
90
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
60
30
Please refer to pages
72-79
for
additional details.
Options
FS:
PH1:
PH2:
QS:
QRS:
Electrical
Fuse
120/277V photo cell
347V photo cell
Quartz lamp socket
for external emergency
power.
Quartz restrike
standby relay.
Model#
Light source selection
MH (ED17)
M50
M70
M100
M150
M175
CF (Gx24q)
Single lamp
F132
F142
F157
F170
CF (Gx24q)
Voltage
120 V
Standard factory
prewired
(If no voltage is specified)
For other voltages, please
specify with catalog number.
H.I.D.
208 V
240 V
277 V
347 V
480 V
Finish
(Refer to color chart)
Standard selection
WHT:Snow
white
BKT:
Jet black
BZT:
Bronze
GRT:
Titanium gray
DGT:
Gun metal
CHT:
Champagne
MST:
Matte silver
GNT:
Forest green
Optional colors
CS:
Custom color
RAL:
RAL# color
PL25W
PL25W-UP
*
M250 (ED18)
Mog. base
HPS (ED17)
Two lamps
H50
F232
H70
F242
H100
F257
H150
*H250
(ED18)
Mog. base
* Lamp operation requires
M250 ANSI code M58
H250 ANSI code S50
(Lamps by others)
Luminaires may be altered for improvements or discontinued without prior notice.
LUMINIS
[ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS
[ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954
.
717
.
4157
Toll free: 888 .401 .6999
Web: www.luminis.com
Sept. 2006 Rev: Feb.2007
Page
76
LUMINIS [ LUMINS INC. ]
