General Product Information
Product Test Conditions
LUXEON UV FC Line LEDs are tested and binned with a DC drive current of 500mA for LUXEON UV FC1 and 1000mA for LUXEON
UV FC2 at a junction temperature, Tj, of 25°C.
Part Number Nomenclature
Part numbers for LUXEON UV FC Line follow the convention below:
L A F 3 – U B B B C 0 0 0 D D D D 1
Where:
A
–
–
–
designates packing type (0=bin tape, 1=tape and reel)
B B B
C
designates minimum peak wavelength (380=380nm, 390=390nm, 400=400nm, 410=410nm)
designates product name and die size (1=LUXEON UV FC1 with 1mm2 die size, 2=LUXEON UV FC2 with
2mm2 die size)
D D D D –
designates minimum radiometric power (0300=300mW, 0350=350mW, 0400=400mW, 0450=450mW,
1400=1400mW, 1600=1600mW, etc.)
Therefore, the following part number is used for a LUXEON UV FC1, with a 1mm2 die, minimum peak wavelength of 390nm and a
minimum radiometric power of 400mW on tape and reel:
L 1 F 3 – U 3 9 0 1 0 0 0 0 4 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON UV FC Line
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS185 LUXEON UV FC Line Product Datasheet 20170710 ©2017 Lumileds Holding B.V. All rights reserved.
2
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
