Absolute Maximum Ratings
Table 4 . Absolute maximum ratings for LUXEON C Color Line .
ParamEtEr
DC Forward Current
[1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature
[1]
(DC & Pulse)
ESD Sensitivity
(ANSI/ESDA/JEDEC JS-001-2012)
LED Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
Reverse Voltage (V
reverse
)
Far rEd
and dEEP rEd
700mA
875mA
135°C
rEd, rEd-oranGE,
amBEr and PC amBEr
1050mA
1300mA
120°C
GrEEn
and Cyan
1050mA
1300mA
135°C
Class 3B
-40°C to 135°C
JEDEC 020c 260°C
3
LUXEON C LEDs are not designed to be driven in reverse bias
BluE
and royal BluE
1050mA
1300mA
135°C
mInt, lImE
and WHItE
1225mA
1500mA
135°C
Notes for Table 4:
1.
Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2.
Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3.
At 10% duty cycle with pulse width of 10ms.
DS144 LUXEON C Color Line Product Datasheet 20171115 ©2017 Lumileds Holding B.V. All rights reserved.
5
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
