Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON 5050ꢀ
ParamEtEr
maXImum PErFormancE
240mA for L150-xxxx502400000
800mA for L150-xxxx500600000
240mA for L150-xxxx5030000S0
1000mA for L150-xxxx5006000S0
DC Forward Current[1, 2]
300mA for L150-xxxx502400000
1000mA for L150-xxxx500600000
300mA for L150-xxxx5030000S0
1250mA for L150-xxxx5006000S0
Peak Pulsed Forward Current[1, 3]
LED Junction Temperature[1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature[1]
125°C
Class 2
105°C
LED Storage Temperature
-40°C to 105°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse
)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.
DS174 LUXEON 5050 Product Datasheet 20190825 ©2019 Lumileds Holding B.V. All rights reserved.
5
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
