General Product Information
Product Test Conditions
LUXEON 5050 LEDs are tested with a 20ms monopulse of 160mA for LUXEON 5050 24V and 640mA for LUXEON 5050 6V at a
junction temperature, T
j
, of 25°C. Forward voltage and luminous flux are binned at a T
j
of 25°C, while color is hot targeted at a
T
j
of 85°C.
Part Number Nomenclature
Part numbers for LUXEON 5050 follow the convention below:
L 1 5 0 –
A A B B
5 0
C C
0 0 0 0 0
Where:
A A
–
B B
–
C C
–
designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K 40=4000K, 50=5000K, 57=5700K, 65=6500K)
designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)
designates voltage (06=6V, 24=24V)
Therefore, the following part number is used for a LUXEON 5050, 3000K 80CRI, 24V:
L 1 5 0 –
3 0 8 0
5 0
2 4
0 0 0 0 0
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 5050 is
compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS174 LUXEON 5050 Product Datasheet 20170604 ©2017 Lumileds Holding B.V. All rights reserved.
2
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
