欢迎访问ic37.com |
会员登录 免费注册
发布采购

L150-5770500600000 参数 Datasheet PDF下载

L150-5770500600000图片预览
型号: L150-5770500600000
PDF下载: 下载PDF文件 查看货源
内容描述: [Single Color LED,]
分类和应用:
文件页数/大小: 17 页 / 1815 K
品牌: LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
 浏览型号L150-5770500600000的Datasheet PDF文件第1页浏览型号L150-5770500600000的Datasheet PDF文件第2页浏览型号L150-5770500600000的Datasheet PDF文件第3页浏览型号L150-5770500600000的Datasheet PDF文件第4页浏览型号L150-5770500600000的Datasheet PDF文件第6页浏览型号L150-5770500600000的Datasheet PDF文件第7页浏览型号L150-5770500600000的Datasheet PDF文件第8页浏览型号L150-5770500600000的Datasheet PDF文件第9页  
Optical Characteristics  
Table 2ꢀ Optical characteristics for LUXEON 5050 at test current, Tj=25°Cꢀ  
Part numBEr  
tyPIcal total IncludEd anGlE [1]  
138°  
tyPIcal VIEWInG anGlE [2]  
L150-xxxx50xx00000  
116°  
Notes for Table 2:  
1. Total angle at which 90% of total luminous flux is captured.  
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.  
Electrical and Thermal Characteristics  
Table 3ꢀ Electrical and thermal characteristics for LUXEON 5050 at test current, Tj=25°Cꢀ  
ForWard VoltaGE [1] (Vf)  
tyPIcal tEmPEraturE  
tyPIcal thErmal  
rEsIstancE—JunctIon  
to soldEr Pad (°c/W)  
Part numBEr  
coEFFIcIEnt oF ForWard  
VoltaGE [2] (ꢁV/°c)  
mInImum  
tyPIcal  
maXImum  
L150-xxxx502400000  
L150-xxxx500600000  
23.5  
5.8  
24.5  
6.1  
26.5  
6.6  
-12  
-3  
1.9  
1.9  
Notes for Table 3:  
1. Lumileds maintains a tolerance of ±1% on forward voltage measurements.  
2. Measured between 25°C and 85°C.  
Absolute Maximum Ratings  
Table 4ꢀ Absolute maximum ratings for LUXEON 5050ꢀ  
ParamEtEr  
maXImum PErFormancE  
240mA for 24V  
800mA for 6V  
DC Forward Current[1, 2]  
300mA for 24V  
1000mA for 6V  
Peak Pulsed Forward Current[1, 3]  
LED Junction Temperature[1] (DC & Pulse)  
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)  
Operating Case Temperature[1]  
125°C  
Class 2  
105°C  
-40°C to 105°C  
LED Storage Temperature  
Reverse Voltage (Vreverse  
)
LUXEON LEDs are not designed to be driven in reverse bias  
Notes for Table 4:  
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.  
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:  
– The frequency of the ripple current is 100Hz or higher  
– The average current for each cycle does not exceed the maximum allowable DC forward current  
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current  
3. At 10% duty cycle with pulse width of 10ms.  
DS174 LUXEON 5050 Product Datasheet 20170604 ©2017 Lumileds Holding B.V. All rights reserved.  
4
 复制成功!