Electrical and Thermal Characteristics
Table 3ꢀ Electrical and thermal characteristics for LUXEON 3535L Color Line at 100mA, Tj=25ºCꢀ
ForWard VoltaGe [1] (V)
tyPIcal temPerature
coeFFIcIent oF ForWard
VoltaGe [2] (ꢅV/°c)
tyPIcal tHermal
resIstance — JunctIon
to solder Pad (°c/W)
color
Part numBer
mInImum tyPIcal maXImum
Red
Red-Orange
PC Amber
Lime
L135-R625003500000
L135-O615003500000
L135-A589003500000
L135-L567003500000
L135-G525003500000
L135-B475003500000
L135-U450003500000
1.75
1.75
2.80
2.80
2.50
2.50
2.50
2.10
2.10
3.05
3.05
3.20
3.00
3.05
2.50
2.50
3.50
3.50
3.50
3.50
3.50
-2.0
-1.7
-1.7
-1.7
-3.0
-2.5
-2.5
20
20
25
25
42
35
35
Green
Blue
Royal Blue
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON 3535L Color Lineꢀ
red and
Pc amBer
and lIme
Blue and
royal Blue
Parameter
red-oranGe
Green
DC Forward Current[1,2]
Peak Pulsed Forward Current[1,3]
LED Junction Temperature[1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature [1]
LED Storage Temperature
125mA
300mA
200mA
200mA
300mA
115°C
Class 2
95°C
200mA
480mA
125°C
Class 2
95°C
240mA
125°C
125°C
Class 2
Class 2
105°C
105°C
-40°C to 105°C
-40°C to 105°C
-40°C to 95°C
-40°C to 95°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage (Vreverse
)
LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.
DS146 LUXEON 3535L Color Line Product Datasheet 20210615 ©2021 Lumileds Holding B.V. All rights reserved.
4
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
