Electrical and Thermal Characteristics
Table 3 . Electrical and thermal characteristics for LUXEON 3014 at 60mA, T
j
=25ºC .
Part numBEr
L130-xxxxxx1400001
ForWard VoltagE
[1]
(V)
mInImum
2.8
tyPIcal
3.1
maXImum
3.3
tyPIcal tEmPEraturE
coEFFIcIEnt oF ForWard
VoltagE (mV/°c)
[2]
-2.0 to -4.0
tyPIcal thErmal
rEsIstancE—JunctIon
to soldEr Pad (°c/W)
35
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4 . Absolute maximum ratings for LUXEON 3014 .
ParamEtEr
DC Forward Current
[1,2]
Peak Pulsed Forward Current
[1,3]
LED Junction Temperature
[1]
(DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature
[1]
LED Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
Reverse Voltage (V
reverse
)
maXImum PErFormancE
120mA
150mA
115°C
Class 2
-40°C to 105°C
-40°C to 100°C
JEDEC 020D 260°C
3
-5V
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current
3. At 10% duty cycle with pulse width of 10ms.
DS208 LUXEON 3014 Product Datasheet 20170601 ©2017 Lumileds Holding B.V. All rights reserved.
4
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
