Electrical and Thermal Characteristics
Table 3ꢀ Electrical and thermal characteristics for LUXEON 3020 at 120mA, Tj=25ºCꢀ
ForWard Voltage (Vf) [1]
tyPIcal temPerature
coeFFIcIent oF ForWard
Voltage (ꢁV/°c) [2]
tyPIcal thermal
resIstance—JunctIon
to solder Pad (°c/W)
Part numBer
mInImum
2.85
tyPIcal
maXImum
3.35
L130-xxxx002011001
3.05
-2.0 to -4.0
13
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4ꢀ Absolute maximum ratings for LUXEON 3020ꢀ
Parameter
maXImum PerFormance
DC Forward Current [1, 2]
Peak Pulsed Forward Current[1, 3]
LED Junction Temperature [1] (DC & Pulse)
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Operating Case Temperature [1, 2]
LED Storage Temperature
240mA
300mA
125°C
Class 2
-40°C to 105°C
-40°C to 105°C
JEDEC 020D 260°C
3
Soldering Temperature
Allowable Reflow Cycles
[4]
Reverse Voltage (Vreverse
)
-10V
Notes for 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Ripple current with a frequency of 50–150Hz is allowed as long as the average of the current waveform is below 240mA and the maximum of the current waveform is lower than 300mA.
3. At 10% duty cycle and pulse width <100μS.
4. At maximum reverse current of 10μA.
DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved.
4
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
