Reflow Soldering Guidelines
tp
Tp
Critical Zone
L to Tp
Ramp-up
T
TL
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 3020.
ProFIle Feature
Preheat Minimum Temperature (Tsmin
Preheat Maximum Temperature (Tsmax
lead-Free assemBly
)
150°C
200°C
)
Preheat Time (tsmin to tsmax
)
120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
217°C
Liquidus Temperature (TL)
Time Maintained Above Temperature TL (tL)
Peak / Classification Temperature (Tp)
Time Within 5°C of Actual Temperature (tp)
Ramp-Down Rate (Tp to TL)
<150 seconds (follows J-STD-020 standard)
260°C
10 to 30 seconds
6°C / second maximum
8 minutes maximum
Time 25°C to Peak Temperature
Notes for Table 14:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
JEDEC Moisture Sensitivity
Table 9ꢀ Moisture sensitivity levels for LUXEON 3020ꢀ
Floor lIFe
soak requIrements standard
leVel
tIme
condItIons
tIme
condItIons
3
168 Hours
≤30°C / 85% RH
192 Hours +5/-0
30°C / 60% RH
DS209 LUXEON 3020 Product Datasheet 20170307 ©2017 Lumileds Holding B.V. All rights reserved.
16