General Product Information
Product Test Conditions
LUXEON 3030 2D Line LEDs are tested with a 20ms monopulse of 120mA at a junction temperature, Tj, of 25°C. Forward voltage
and luminous flux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 85°C.
Part Number Nomenclature
Part numbers for LUXEON 3030 2D Line follow the convention below:
L 1 3 0 – A A B B 0 0 3 0 0 0 C 2 D
Where:
A A
–
designates nominal CCT (22=2200K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K,
57=5700K, 65=6500K)
B B
C
–
–
–
designates minimum CRI (70=70CRI, 80=80CRI and 90=90CRI)
designates package type (W=Round LES, X=Square LES)
D
designates Lumileds internal code (1, 2, 3, etc.=shares the same base part)
Therefore, the following part number is used for a LUXEON 3030 2D (Square LES), 3000K 80CRI:
L 1 3 0 – 3 0 8 0 0 0 3 0 0 0 X 2 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3030
2D Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).
DS207 LUXEON 3030 2D Line Product Datasheet 20180405 ©2018 Lumileds Holding B.V. All rights reserved.
2
LUMILEDS [ LUMILEDS LIGHTING COMPANY ]
