References
References
Glossary of Terms
Audio Frequency (AF) – 20 – 20,000 cycles
per second
Color Code
A
Used to identify wires or circuits by color, utilizing
solid colors, tracers, braids, and other surface
printing.
Abrasion Resistance
The ability of wire or cable to resist wear and tear to
the surface.
AUTO
Automotive Industry Wiring Color Code for
conductors.
Conductivity
AC (Alternating Current)
See Alternating Current.
The ability of a material to allow electrons to flow,
measured by the current per unit of voltage applied.
It is the reciprocal of resistivity.
AWG (American Wire Gauge)
A numerical standard used to refer to the diameter
cross-sectional area of a wire. Smaller numbers
refer to larger cross sectional areas. Is sometimes
referred to as the Brown and Sharpe (B&S) wire
gauge.
ACR (Attenuation Cross Talk Ratio)
Attenuation Cross Talk Ratio – the difference between
attenuation and cross talk measured in decibel at a
given frequency.
Conductor
A material that can easily conduct the flow of
electrical current. Metals are considered to be good
conductors for carrying electrical current.
AF (Audio Frequency)
B
Connector
AM (Amplitude Modulation)
Binder
A device used to provide rapid connect or disconnect
Alternating Current (AC or a.c.)
for electrical cable and wire terminations.
A spirally wrapped tape or thread used for holding
assembled cable components in place awaiting
subsequent manufacturing operations.
Electrical current, which changes magnitude and
direction in a regular periodic way and is often
described by the formula I(t) = I 0 sin (wt + Ø), where
I 0 is the peak value or amplitude of the current, I 0
is the angular frequency, Ø is the phase constant and
(wt + Ø) is called the phase of the current.
Connector Insert
Insulating device that holds the contacts in their
proper location.
BNC (Bayonet Neil Concelman)
A coaxial connector used exclusively in video and RF
applications.
Contact
The parts of a connector that carries the electrical
current through the circuit.
American Society for Testing
and Materials
See ASTM.
Braid
A metal mesh or screen material, usually copper,
which is used in a cable to shield against electrical
interference and reinforces the cable jacket against
damage.
Contact Holder
Insulating device that holds the contacts in their
proper position.
Ambient Temperature
The temperature of a medium (gas or liquid)
surrounding an object.
Control Cable
Bridge Rectifier
A term sometimes used to describe the cable
that runs between the PLC and a distribution box
(Lumberg ASB or ZV product).
An electrical device made up of four diodes,
performing the function of full wave rectification
(converts the full AC sine wave to DC).
American Wire Gauge (AWG)
The U.S. standard system to specify size of electrical
wiring.
Cord
A small and flexible insulated cable.
C
AMP (A) (Ampere)
A unit of measure for electrical current.
CPE (Chlorinated Polyethylene)
Cable
A flexible synthetic rubber material with high tear
strength and provides good resistance to most
inorganic chemicals. It is inherently difficult to ignite.
Either a stranded conductor with or without insulation
and other coverings (single conductor cable), or
a combination of conductors insulated from one
another (multiple conductor cable).
Ampere (A)
The unit of current. One ampere is the current flowing
through one ohm of resistance at one volt potential.
CPU (Central Processing Unit)
Amplitude Modulation (AM)
Capacitor
Creepage
ANSI (American National Standards Institute)
Appliance Wiring Material (AWM). UL designation
for cable intended for use in the appliance wiring
industry.
An electronic device, which can be used to store
an electric charge or to allow alternating current to
flow. The ideal capacitor will not allow steady state
or DC current to flow. The capacitor is used in many
applications such as transient suppression, electrical
noise filtering, timing circuits, etc.
Refers to the conduction of electricity across the
surface of a dielectric.
Crimp Termination
A connection, in which a metal sleeve is secured to a
conductor by mechanically crimping the sleeve with
pliers, presses or automated crimping machines.
Armored Cable
A cable provided with a wrapping of metal providing
for mechanical protection.
CATV (Community Antenna Television)
CCTV (Closed Circuit Television)
CRT (Cathode Ray Tube)
ASTM (American Society for Testing
and Materials)
Acronym for American Society for Testing and
Materials – a standards organization, which suggests
test methods, definitions or practices.
CSA (Canadian Standards Association)
The Canadian equivalent to the Underwriters
Laboratories organization.
CEC (Canadian Electrical Code)
Canadian version of USNEC.
www.lumberg-automationusa.com
1-717-217-2299
143