1N5333B-1N5388B
Zener Diode
POWER DISSIPATION: 5.0 W
DO-201AD
Features
Silicon planar power zener diodes
For use in stabilizing and clipping curcuits with high
power rating.
Standard zener voltage tolerance is ±10%. Add
suffix"B" for ±5% tolerance. other zener voltage
and tolerances are available upon request.
Mechanical Data
Case:DO-201AD
Polarity: cathode Band
Dimensions in inches and (millimeters)
Marking: type number
Approx. weight: 0.032 ounces, 0.9 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by20%.
SYMBOL
VALUE
UNIT
Zener current (see Table "Characteristics")
DC pow er dissipation @ TL=75, measure at zero lead length (Fig.1)
derate above 75 (NOTE1)
5.0
40.0
W
mW
PD
Peak forw ard surge current 8.3ms single half sine-w ave superimposed on rated
IFSM
see fig.5
-55---+150
-55---+150
A
load (JEDEC Method)(NOTE1,2)
Junction temperature
TJ
Ts
Storage temperature range
NOTES: (1) Mounted on 8.0mm2 copper pads to each terminal.
(2) 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minute maximum.
http://www.lgesemi.com
Revision:20170701-P1
mail:lge@lgesemi.com
LGE [ LGE ]
