LND1083/84/85
The * denotes the specifications which apply over the full operating temperature range.
Note 1: See thermal regulation specifications for changes in output voltage due to heating effects. Load
and line regulations are measured at a constant junction temperature by low duty cycle pulse testing.
Note 2: Line and load regulation are guaranteed up to the maximum power dissipation (60W for the
LND1083, 45W for the LND1084 (K, P) 30W for the LND1084 (T) and 30W for the LND1085). Power
dissipation will not be available over the full input/output voltage range.
Note 3:I
fillload
is defined in the current limit curves. I
fillload
curve is defined as the minimum value of current
limit as a function of input to output voltage.
Note 4: Dropout voltage is specified over the full output current range of the device.
Note 5: For LND1083 I
fillLoad
is 5Afor -55ºC
≤T
j
≤
-40ºand 7.5A for T
j
>-40ºC
BLOCK DIAGRAM
•
Linear Dimensions, Inc.
•
445 East Ohio Street, Chicago IL 60611 USA
•
tel 312.321.1810
•
fax 312.321.1830
•
•