Data Sheet
HW/HC004/005/006 Series DC-DC Power Module:
May 16, 2008
18-36Vdc & 36-75Vdc Input; 1.0V-5Vdc Output; 4A - 6A Output Current
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Device
HC
Symbol
VIN
Min
-0.3
-0.3
-0.3
-40
Max
50
Unit
Vdc
Vdc
Vdc
°C
Input Voltage
Continuous
HW
HW
All
VIN
80
Transient (100ms)
VIN, trans
TA
100
85
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
I/O Isolation Voltage (100% factory tested)
All
All
Tstg
-55
125
°C
2250
Vdc
⎯
⎯
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Device
Symbol
Min
Typ
Max
Unit
Operating Input Voltage
HC
HW
HC
VIN
VIN
18
36
24
54
36
75
Vdc
Vdc
Adc
Maximum Input Current
(VIN=0V to 75V, IO=IO, max
IIN,max
1.75
)
HW
All
IIN,max
I2t
0.85
1
Adc
A2s
Inrush Transient
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 12μH source impedance; VIN=0V to
75V, IO= IOmax ; see Figure 9)
All
All
5
mAp-p
dB
Input Ripple Rejection (120Hz)
50
EMC, EN55022
See EMC Considerations section
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being
part of complex power architecture. To preserve maximum flexibility, internal fusing is not included; however, to
achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-
acting fuse with a maximum rating of 3A (see Safety Considerations section). Based on the information provided in
this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be
used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2