Data Sheet
September 6, 2008
FNW700R Series Power Modules; DC-DC Converters
36-75Vdc Input; 28Vdc, 700W Output
Features
High power density: 127 W/in
3
Industry standard pin-out
Low output ripple and noise
Industry standard Full brick footprint
116.6mm x 60.7mm x 12.7mm
(4.6” x 2.4” x 0.5”)
Remote Sense
2:1 input voltage range
Applications
RF Power Amplifier
Wireless Networks
Switching Networks
Single tightly regulated main output
Constant switching frequency
Latch after fault shutdown
Over temperature protection auto restart
Loosely regulated auxiliary output
Power good signal
Output voltage adjustment trim (+10%/-40%)
Options
Output OCP/OVP auto restart
Shorter pins
Unthreaded heatsink holes
Wide operating case temperature range (-40°C to
100°C)
CE mark meets 73/23/EEC and 93/68/EEC
directives
§
UL60950-1/CSA
†
C22.2 No. 60950-1-03 Certified
‡
(
C
CSA
US
) and VDE 0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The FNW700R series of dc-dc converters are a new generation of isolated DC/DC power modules providing up to
700W output power in an industry standard full size brick footprint, which makes it an ideal choice for high voltage
and high power applications. Threaded-through holes are provided to allow easy mounting or addition of a heatsink
for high-temperature applications. The output is fully isolated from the input, allowing versatile polarity configurations
and grounding connections
§
†
This product is intended for integration into end use equipment only
CSA
is a registered trademark of Canadian Standards Association.
‡
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS07-003 ver 1.45
PDF name: fnw700r.ds.pdf
:
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
