Data Sheet
EUK240 Series Power Modules; DC-DC converters
36 – 60Vdc input; 9.6Vdc Output; 240W
March 26, 2008
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute
stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those
given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can
adversely affect the device reliability.
Parameter
Device
Symbol
Min
Max
Unit
Input Voltage
Continuous
All
All
All
All
All
VIN
-0.3
-0.3
-40
-55
⎯
60
75
Vdc
Vdc
°C
Non-Operating Condition
Operating Ambient Temperature
Storage Temperature
I/O Isolation Voltage (100% factory tested)
TA
85
Tstg
Viso
125
1500
°C
Vdc
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Device
Symbol
Min
Typ
Max
Unit
Operating Input Voltage
Maximum Input Current
(VIN=0 to 60Vdc, PO=PO, max
All
VIN
36
48
60
Vdc
Adc
A2s
)
All
All
IIN,max
I2t
5
1
Inrush Transient
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 12μH source impedance;
Ta 25oC, Cin = 33 µF)
All
All
50
14
mAp-p
dB
⎯
⎯
⎯
⎯
Input Ripple Rejection (120Hz)
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being
part of complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to
achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-
acting fuse with a maximum rating of 15 A (see Safety Considerations section). Based on the information provided in
this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be
used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2