Data Sheet
EQW010-040 Series Power Modules
March 4, 2009
36 – 75Vdc Input; 1.0 to 12.0Vdc Output; 10 to 40A Output Current
Table 2. Device Options
Option*
Suffix**
Negative remote on/off logic
1
Auto Re-start (for Over Current / Over voltage Protection)
4
6
Pin Length: 3.68 mm ± 0.25mm , (0.145 in. ± 0.010 in.)
Pin Length: 2.79 mm ± 0.25mm , (0.110 in. ± 0.010 in.)
8
Heat plate (Module height = 12.2 mm (0.48 in.) nominal, use with cold-plates
Heat plate (Module height = 10.4 mm (0.41 in.) nominal, use with heat sinks
Surface mount connections (not available with heat plate options -C, -H)
Alternative Voltage Programming equations (1.0V and 1.2V modules only)
-C
-H
-S
-V
Note: Legacy device codes may contain a –B option suffix to indicate 100% factory Hi-Pot tested to the isolation voltage specified in
the Absolute Maximum Ratings table. The 100% Hi-Pot test is now applied to all device codes, with or without the –B option suffix.
Existing comcodes for devices with the –B suffix are still valid; however, no new comcodes for devices containing the –B suffix will
be created.
Asia-Pacific Headquarters
Tel: +65 6416 4283
Europe, Middle-East and Africa Headquarters
World Wide Headquarters
Tel: +49 898 780 672 80
Lineage Power Corporation
3000 Skyline Drive, Mesquite, TX 75149, USA
+1-800-526-7819
India Headquarters
(Outside U.S.A.: +1-972-284-2626)
www.lineagepower.com
Tel: +91 80 28411633
e-mail: techsupport1@lineagepower.com
Lineage Power reserves the right to m ake changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or
application. No rights under any patent accompany the sale of any such product(s) or information.
© 2008 Lineage Power Corporation, (Mesquite, Texas) All International Rights Reserved.
Document No: DS06-112 ver. 1.19
PDF name: eqw010-040_ds.pdf
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
