Data Sheet
Austin MiniLynxTM 12V SIP Non-isolated Power Modules:
March 31, 2008
8.3 – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 3A output current
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Device
Symbol
Min
Typ
Max
Unit
On/Off Signal interface
Device code with Suffix “4” – Positive logic
(On/Off is open collector/drain logic input;
Signal referenced to GND - See feature description
section)
Input High Voltage (Module ON)
All
All
All
All
VIH
IIH
―
―
―
―
VIN, max
10
V
μA
V
Input High Current
Input Low Voltage (Module OFF)
Input Low Current
VIL
IIL
-0.2
―
―
0.3
1
0.2
mA
Device Code with no suffix – Negative Logic
(On/OFF pin is open collector/drain logic input with
external pull-up resistor; signal referenced to GND)
Input High Voltage (Module OFF)
Input High Current
All
All
All
All
VIH
IIH
2.5
―
0.2
―
VIN,max
1
Vdc
mA
Vdc
μA
Input Low Voltage (Module ON)
Input low Current
VIL
IIL
-0.2
0.3
10
―
Turn-On Delay and Rise Times
(IO=IO, max , VIN = VIN, nom, TA = 25 oC, )
All
All
Tdelay
Tdelay
―
―
3
3
―
―
msec
msec
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which VIN =VIN, min until Vo=10% of Vo,set)
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic Low (delay from
instant at which Von/Off=0.3V until Vo=10% of Vo, set)
All
All
Trise
―
4
―
msec
Output voltage Rise time (time for Vo to rise from 10%
of Vo,set to 90% of Vo, set)
1
Output voltage overshoot – Startup
IO= IO, max; VIN = VIN, min to VIN, max , TA = 25 oC
―
% VO, set
Overtemperature Protection
Tref
140
°C
⎯
⎯
(See Thermal Consideration section)
Input Undervoltage Lockout
Turn-on Threshold
All
All
7.9
7.8
V
V
Turn-off Threshold
LINEAGE POWER
5