Data Sheet
Austin LynxTM II SMT Non-isolated Power Modules:
August 28, 2009
2.4 – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 10A output current
Characteristic Curves (continued)
The following figures provide typical characteristics for the Austin LynxTM II SMT modules at 25ºC.
TIME, t (2 ms/div)
TIME, t (20μs/div)
Figure 13. Transient Response to Dynamic Load
Change from 100% of 50% full load (Vo = 5.0 Vdc,
Cext = 2x150 μF Polymer Capacitors).
Figure 16. Typical Start-Up with application of Vin
(Vin = 5.5Vdc, Vo = 3.3Vdc, Io = 10A).
TIME, t (2 ms/div)
TIME, t (2 ms/div)
Figure 14. Typical Start-Up Using Remote On/Off
(Vin = 5.5 Vdc, Vo = 3.3Vdc, Io = 10A).
Figure 17. Typical Start-Up with Prebias (Vin =
3.3Vdc, Vo = 1.8Vdc, Io = 1A, Vbias =1.0Vdc).
TIME, t (2 ms/div)
TIME, t (10ms/div)
Figure 15. Typical Start-Up Using Remote On/Off with
external capacitors (Vin = 5.5Vdc, Vo = 3.3Vdc, Io =
10A, Co = 1050μF).
Figure 18. Output short circuit Current
(Vin = 5.0Vdc, Vo = 0.75Vdc).
LINEAGE POWER
8
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
