Data Sheet
April 1, 2008
Austin SuperLynx
TM
II 12V SIP Non-isolated Power Modules:
8.3Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 16A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Flexible output voltage sequencing EZ-
TM
SEQUENCE
Delivers up to 16A output current
EZ-SEQUENCE
TM
High efficiency – 92% at 3.3V full load (V
IN
= 12.0V)
Small size and low profile:
50.8 mm x 12.7 mm x 8.1 mm
(2.00 in x 0.5 in x 0.32 in)
Low output ripple and noise
Constant switching frequency (300KHz)
High Reliability:
Calculated MTBF = 9.2M hours at 25 C Full-load
Programmable Output voltage
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote Sense
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL*
60950-1Recognized,
CSA
C22.2 No.
60950-1-03 Certified, and
VDE
‡
0805:2001-12
(EN60950-1) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
†
o
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin SuperLynx
TM
II 12V SIP (single in-line package) power modules are non-isolated dc-dc converters that can
deliver up to 16A of output current with full load efficiency of 92% at 3.3V output. These modules provide a precisely
regulated output voltage programmable via an external resistor from 0.75Vdc to 5.0Vdc over a wide range of input
TM
TM
voltage (V
IN
= 8.3 – 14Vdc). Austin SuperLynx II has a sequencing feature, EZ-SEQUENCE that enable
designers to implement various types of output voltage sequencing when powering multiple modules on board. Their
open-frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-022 ver. 1.21
PDF name: superlynx_II_sip_12v_ds.pdf