Data Sheet
March 31, 2008
Austin MicroLynx II
TM
12V SIP Non-isolated Power Modules:
8.3Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 6A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Flexible output voltage sequencing
EZ-SEQUENCE
TM
Delivers up to 6A output current
EZ-SEQUENCE
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
TM
High efficiency – 89% at 5.0V full load (V
IN
=
12.0V)
Small size and low profile:
25.4 mm x 12.7 mm x 6.68 mm
(1.00 in x 0.5 in x 0.263 in)
Low output ripple and noise
High Reliability:
Calculated MTBF = 15.3M hours at 25 C Full-load
Constant switching frequency (300 KHz)
Programmable Output voltage
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL*
60950-1Recognized,
CSA
C22.2 No.
60950-1-03 Certified, and
VDE
‡
0805:2001-12
(EN60950-1) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
†
o
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin MicroLynx II
TM
12V SIP power modules are non-isolated dc-dc converters that can deliver up to 6A of output
current with full load efficiency of 89% at 5.0V output. These modules provide precisely regulated output voltage
programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input voltage (V
IN
= 8.3 - 14V).
TM
TM
The Austin MicroLynx II 12V series has a sequencing feature, EZ-SEQUENCE that enable designers to
implement various types of output voltage sequencing when powering multiple voltages on a board. Their open-
frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-025 ver. 1.31
PDF name: microlynx_II_12v_sip_ds.pdf
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
