Data Sheet
12V TLynxTM Non-isolated DC-DC Power Modules:
July 24, 2009
4.5 – 14Vdc input; 0.69Vdc to 5.5Vdc output; 20A output current
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Device
Symbol
Min
Max
Unit
Input Voltage
All
VIN
-0.3
15
Vdc
Continuous
Voltage on SEQ terminal
Voltage on SYNC terminal
Voltage on PG terminal
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
All
VSEQ
VSYNC
VPG
TA
-0.3
-0.3
-0.3
-40
-40
-55
VIN
12
Vdc
Vdc
Vdc
°C
All
All
6
All
85
-D version
All
TA
105
125
°C
Tstg
°C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Device
All
Symbol
VIN
Min
Typ
Max
14
Unit
Vdc
Adc
Operating Input Voltage
Maximum Input Current
(VIN=4.5V to 14V, IO=IO, max
4.5
⎯
All
IIN,max
20
)
Input No Load Current
(VIN = 10.0Vdc, IO = 0, module enabled)
(VIN = 12.0Vdc, IO = 0, module enabled)
Input Stand-by Current
VO,set = 0.69 Vdc
VO,set = 3.3Vdc
All
IIN,No load
IIN,No load
IIN,stand-by
42
74
3
mA
mA
mA
(VIN = 12.0Vdc, module disabled)
Inrush Transient
All
All
All
I2t
1
A2s
mAp-p
dB
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; VIN
=4.5V to 14V, IO= IOmax ; See Test Configurations)
43
45
Input Ripple Rejection (120Hz)
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to an
integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included;
however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies
require a fast-acting fuse with a maximum rating of 20 A (see Safety Considerations section). Based on the
information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a
lower rating can be used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
