LM195WD1
Liquid Crystal Display
Product Specification
3. Electrical specifications
3-1. Electrical characteristics
It requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input power for the LED/Backlight, is typically
generated by an LED Driver. The LED driver is an external unit to the LCDs.
Table 2. Electrical characteristics
Values
Parameter
Symbol
Unit
Notes
Min
Typ
Max
MODULE :
Power Supply Input Voltage
Permissive Power Input Ripple
VLCD
VLCD
4.5
5.0
-
5.5
0.4
Vdc
V
-
-
-
-
-
-
2
ILCD-MOSAIC
ILCD-BLACK
ILCD-L80
PLCD
(625)
(694)
(607)
(3.12)
-
(718)
(798)
(698)
(3.59)
3.5
mA
mA
mA
Watt
A
1,3
1,4
1
Power Supply Input Current
Power Consumption
Inrush current
1,3
1,5
IRUSH
Note :
1. The specified characteristics perform under the VLCD=5.0V, 25 2°C, fV=60Hz condition.
fV is the frame frequency.
2. Permissive Power Ripple should be measured under VLCD=5.0V, 25 2°C,
fV =75Hz condition and At that time,
we recommend the bandwidth configuration of oscilloscope is to be under 20MHz. (See FIG.3)
3. Mosaic pattern(8 x 6) is displayed.
4. Input current is specified at the maximum current pattern.
5. The duration of Inrush current is about 5ms and rising time of power Input is 500us 20%.
FIG.3 pattern for Electrical characteristics
power consumption
Energy star 5.0
power input ripple
White : 255Gray
Black : 0Gray
White : 255Gray (80%)
Black : 0Gray (20%)
Mosaic Pattern(8 x 6)
L80 Pattern
Full Black Pattern
6 / 31
Ver. 0.2
Feb. 04, 2013