LC230WX3
Liquid Crystal Display
Product Specification
1. General Description
LC230WX3-SLA1 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(UCCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 23 inch diagonally measured
active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus presenting a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1 port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.
RGB
Source Driver Circuit
S1
S1366
G1
+12.0V
Timing Controller
(LVDS Rx integrated)
LVDS
5pair
CN1
(30pin)
TFT - LCD Panel
Option
# 9,28
(1366 × RGB × 768 pixels)
G768
Power Circuit
Block
+24.0V
GND
Inverter
(CN2,14pin)
Back light Assembly (6UCCFL)
General Features
Active Screen Size
Outline Dimension
Pixel Pitch
23 inches (582.96mm) diagonal
546.0mm(H) x 318.3mm(V) x 42.1mm(D) (Typ.)
0.124mm x 0.372mm x RGB
Pixel Format
1366 horiz. by 768 vert. pixels RGB stripe arrangement
8-bit, 16.7 M colors
Color Depth
Luminance, White
Viewing Angle (CR>10)
Power Consumption
Weight
450 cd/m2 (Center 1 point Typ.)
Viewing angle free ( R/L 178(Typ.), U/D 178(Typ.))
Total 66.84Watt (Typ.) (Logic=3.24W, Lamp=63.6W [Lamp current=6.5mA] )
3,800 g (Typ.) 4,000g(Max)
Display Operating Mode
Surface Treatment
Transmissive mode, normally black
Hard coating(3H), Anti-glare treatment of the front polarizer
4 / 28
Ver.1.0
Nov.22, 2005
LG [ LG SEMICON CO.,LTD. ]
