Specifications GAL20XV10
fmax Descriptions
CLK
LOGIC
ARRAY
REGISTER
CLK
LOGIC
ARRAY
t
su
tco
REGISTER
fmax with External Feedback 1/(tsu+tco)
Note: fmax with external feedback is calculated from measured
tsu and tco.
t
cf
pd
t
CLK
fmax with Internal Feedback 1/(tsu+tcf)
Note: tcf is a calculated value, derived by subtracting tsu from
the period of fmax w/internal feedback (tcf = 1/fmax - tsu). The
value of tcf is used primarily when calculating the delay from
clocking a register to a combinatorial output (through registered
feedback), as shown above. For example, the timing from clock
to a combinatorial output is equal to tcf + tpd.
LOGIC
REGISTER
ARRAY
t
su + th
fmax with No Feedback
Note: fmax with no feedback may be less than 1/(twh + twl). This
is to allow for a clock duty cycle of other than 50%.
Switching Test Conditions
+5V
Input Pulse Levels
GND to 3.0V
3ns 10% – 90%
1.5V
Input Rise and Fall Times
Input Timing Reference Levels
Output Timing Reference Levels
R
1
1.5V
Output Load
See Figure
3-state levels are measured 0.5V from steady-state active
level.
FROM OUTPUT (O/Q)
UNDER TEST
TEST POINT
C L*
Output Load Conditions (see figure)
R
2
Test Condition
R1
R2
CL
A
300Ω
∞
300Ω
∞
390Ω
390Ω
390Ω
390Ω
390Ω
50pF
50pF
50pF
5pF
Active High
Active Low
Active High
Active Low
B
C
*C L INCLUDES TEST FIXTURE AND PROBE CAPACITANCE
300Ω
5pF
11