Single in-line DC-DC converter
Dual output 1.5W/3W
PVD-SERIES
Ⅵ Model name
PVD 3 - 24 - 1212
Series
name
Output
power
Input
voltage
Output
voltage
Ⅵ Features
ⅷ Input/Output isolation
ⅷ Single in-line type
ⅷ Over current protection
ⅷ Adjustable output voltage
Ⅵ PVD1R5 (1.5W type) Specifications
Model
PVD1R5-5-1212
PVD1R5-12-1212
12VDC (9~18V)
PVD1R5-24-1212
24VDC (18~36V)
PVD1R5-48-1212
48VDC (36~72V)
Input Voltage
Vdc
Vdc
mA
W
5VDC (4.5~9.0V)
Output Voltage (*1)
Output Current (max)
Output Power (max)
Withstand Voltage
Cooling
±12V±5%
(±15V±5%)
(0 ~ ±50)
(1.5)
±12V±5%
(±15V±5%)
(0 ~ ±50)
(1.5)
±12V±5%
0 ~ ±60
1.44
(±15V±5%)
(0 ~ ±50)
(1.5)
±12V±5%
(±15V±5%)
(0 ~ ±50)
(1.5)
0 ~ ±60
1.44
0 ~ ±60
1.44
0 ~ ±60
1.44
—
Input to Output : 500VAC for 1 minute
Convection cooling
—
Operating Temperature
—
–20 ~ +70°C (–20 ~ +50°C: 100%, +70°C: 50%)
Ⅵ PVD3 (3W type) Specifications
Model
PVD3-5-1212
PVD3-12-1212
12VDC (9~18V)
PVD3-24-1212
24VDC (18~36V)
PVD3-48-1212
48VDC (36~72V)
Input Voltage
Vdc
Vdc
mA
W
5VDC (4.5~9.0V)
Output Voltage (*1)
Output Current (max)
Output Power (max)
Withstand Voltage
Cooling
±12V±5%
0 ~ ±125
(±15V±5%)
(0 ~ ±100)
±12V±5%
0 ~ ±125
(±15V±5%)
(0 ~ ±100)
±12V±5%
0 ~ ±125
(±15V±5%)
(0 ~ ±100)
±12V±5%
0 ~ ±125
(±15V±5%)
(0 ~ ±100)
3.0
3.0
3.0
3.0
—
Input to Output : 500VAC for 1 minute
Convection cooling
—
Operating Temperature
(*1) Refer to Terminal connection
—
–20 ~ +70°C (–20 ~ +50°C: 100%, +70°C: 50%)
(*2) External capacitors are required at both input and output.
(*3) Over current protection: Output current limiting automatic recovery. Avoid to operate overload or dead short for more than 30 seconds.
Ⅵ Outline drawing
PVD1R5 (1.5W type)
PVD3 (3W type)
1 : +V Output pin
5
:
TRM Output voltage setting pin
1,2: +V Output pin
7
: TRM Output voltage setting pin
2,3: Common ground pin
4 : –V Output pin
7,8 : –V Input pin
9,10: +V Input pin
3,4: Common ground pin 9,10 : –V Input pin
5,6: –V Output pin 11,12: +V Input pin
Ⅵ Terminal connection
Output voltage can be adjusted by TRM terminal.
Output power must be within the rating, when increasing the output voltage.
PPD1R5 (1.5W type) ±12V output: 5pin open ±15V output: 5pin to 4pin connected
PPD3 (3W type)
124
±12V output: 7pin open ±15V output: 7pin to 5pin (6pin) connected
LAMBDA [ DENSEI-LAMBDA ]
