KK4034B
TRUTH TABLE FOR REGISTER INPUT-LEVELS AND RESULTING REGISTER
OPERATION
“A”
Enable
L
L
L
L
L
L
H
H
H
H
H
H
P/S
L
L
H
H
H
H
L
L
H
H
H
H
A/B
L
H
L
L
H
H
L
H
L
L
H
A/S
X
X
L
H
L
H
X
X
L
H
L
Operation
*
Serial Mode; Synch. Serial Data Input, “A” Parallel Data Outputs Disabled
Serial Mode, Synch. Serial Data Input, “B” Parallel Data Output
Parallel Mode; “B” Synch. Parallel Data Inputs, “A” Parallel Data Outputs
Disabled
Parallel Mode; “B” Asynch. Parallel Data Inputs, “A” Parallel Data Outputs
Disabled
Parallel Mode; “A” Parallel Data Inputs Disabled, “B” Parallel Data Outputs,
Synch. Data Recirculation
Parallel Mode; “A” Parallel Data Inputs Disabled, “B” Parallel Data Outputs,
Asynch. Data Recirculation
Serial Mode; Synch. Serial Data Input, “A” Parallel Data Output
Serial Mode; Synch. Serial Data Input, “B” Parallel Data Output
Parallel Mode; “B” Synch. Parallel Data Input, “A” Parallel Data Output
Parallel Mode; “B” Asynch. Parallel Data Input, “A” Parallel Data Output
Parallel Mode; “A” Synch. Parallel Data Input, “B” Parallel Data Output
H
H Parallel Mode; “A” Asynch. Parallel Data Input, “B” Parallel Data Output
*
Outputs change at positive transition of clock in the serial mode and when the A/S control input is “low” in the
parallel mode. During transfer from parallel to serial operation A/S should remain low in oder to prevent D
S
transfer
into Flip Flops.
X = Don’t Care
PARALLEL OPERATION
A high P/S input signal allows data transfer into the register via the parallel data lines synchronously with the
positive transition of the clock provided the A/S input is low. If the A/S input is high the transfer is independent of the
clock. The direction of data flow is controlled by the A/B input. When this signal is high the A data lines are inputs
(and B data lines are outputs); a low A/B signal reverses the direction of data flow.
The AE input is an additional feature which allows many registers to feed data to a common bus. The A DATA
lines are enabled only when this signal is high.
Data storage through recirculation of data in each register stage is accomplished by making the A/B signal high
and the AE signal low.
SERIAL OPERATION
A low P/S signal allows serial data to transfer into the register synchronously with the positive transition of the
clock. The A/S input is internally disabled when the register is in the serial mode (asynchronous serial operation is not
allowed).
The serial data appears as output data on either the B lines (when A/B is high) or the A lines (when A/B is low
and the AE signal is high).
5
KODENSHI [ KODENSHI KOREA CORP. ]
