KOA SPEER ELECTRONICS, INC.
SS-239 R4
8. Characteristics
8-1 Mechanical Characteristics
Item
Withstanding
Soldering Heat
Solderability
Requirement
No visual damage
± 1.0%
More than 95% of the surface of the termination
must be covered new solder
± 1.0%
Test Methods (JIS C 5202)
6.10
260°C ± 5°C
10 ± 1 sec.
6.11
230°C ± 5°C
3 ± 0.5 sec.
6.1.4
1) Bending
2A, 2B
Circuit board bending 5mm
Circuit board bending 2mm
Termination Strength
2) Shear
3) Pull-off strength
Vibration
Withstanding Solvent
± 0.5%
No visual & mechanical damage
6.3 Condition A
Each direction / 2hrs
1)
4.2 and 4.9
2)
MIL-STD-202F
Test method 215
8-2 Electrical Characteristics
Item
Resistance
Resistance of
Temperature Coefficient
Short Time Overload
Intermittent Overload
Insulation
Requirement
Within tolerance
Within specified R.T.C
-55°C/125°C
± 2.0%
± 5.0%
Above 10
4
MΩ
Test Methods (JIS C 5202)
5.1
Measuring Voltage A, 25 °C
5.2 Condition B
5.5 Condition A
5.8
Applied Voltage:
RV x 2.5
5.5
500V DC
The following sketch:
\
PAGE 4 OF 8
Bolivar Drive
■
P.O. Box 547
■
Bradford, PA 16701
■
USA
■
814-362-5536
■
Fax 814-362-8883
■
www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.