Website: www.kingtronics.com
Email: info@kingtronics.com Tel: (852) 8106 7033 Fax: (852) 8106 7099
LKT
Low Voltage Multilayer Chip Ceramic
Capacitor
4. Dimensions of Reel:
φ180mmReel
5. Taping Figure
6. Taping Method
①Tapes for capacitors are wound clockwise. The sprocket holes are to the right as the tape is pulled toward the user.
②The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.
③Part of the leader and part of the empty tape shall be attached to the end of the tape as follows.
④Missing capacitors number within 0.1% of the number per reel or 1pc, whichever is greater, and are not continuous.
⑤The top tape and bottom tape shall not protrude beyond the edges of the tape and shall not cover sprocket holes.
⑥Cumulative tolerance of sprocket holes, 10 pitches: ±0.3mm.
⑦Peeling off force: 0.1 to 0.6N in the direction shown down.
Note: Specifications are subject to change without notice.
8