AAA5060SUREVGEC
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD0905
APPROVED: J. Lu
REV NO: V.5
DATE: MAR/14/005
DRAWN: B.H.LI
PAGE: 5 OF 5
CHECKED: Allen Liu
ERP: 1201000783