Selection Guide
Iv (mcd) [2]
@ 2mA
Viewing
Angle [1]
Part No.
Emitting Color (Material)
Lens Type
Min.
120
*30
Typ.
220
*60
2θ1/2
AA3528LSECKT/J4
Notes:
Super Bright Orange (AlGaInP)
Water Clear
120°
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
λpeak
λD [1]
Δλ1/2
C
Parameter
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
Capacitance
Emitting Color
Typ.
611
605
17
Max.
Units
Test Conditions
IF=2mA
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
Super Bright Orange
nm
nm
nm
pF
V
IF=2mA
IF=2mA
27
VF=0V;f=1MHz
IF=2mA
VF [2]
IR
Forward Voltage
1.8
2.1
10
Reverse Current
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
105
50
Units
mW
mA
mA
V
Power dissipation
DC Forward Current
Peak Forward Current [1]
Reverse Voltage
150
5
Operating Temperature
Storage Temperature
-40°C To +85°C
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static
electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAO7531
APPROVED: Wynec
REV NO: V.1A
DATE: MAR/23/2016
DRAWN: M.Liu
PAGE: 2 OF 5
CHECKED: Allen Liu
ERP: 1201009174