AA2214SESK
2.2 x 1.4 mm Surface Mount LED Lamp
DESCRIPTIONS
PACKAGE DIMENSIONS
ꢀ
ꢀ
ꢀ
ꢀ
The Super Bright Orange device is made with
AlGaInP (on GaAs substrate) light emitting diode chip
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
FEATURES
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
2.2 mm x 1.4 mm, 1.3 mm high
Low power consumption
Available on tape and reel
Package: 2000 pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ꢀ0.1
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Iv (mcd) @ 20mA [2]
Viewing Angle [1]
Emitting Color
(Material)
Part Number
Lens Type
Min.
Typ.
2θ1/2
280
400
■
Super Bright Orange
(AlGaInP)
AA2214SESK
Water Clear
120°
*80
*180
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
*
Luminous intensity value is traceable to CIE127-2007 standards.
Page 1 / 4
© 2017 Kingbright. All Rights Reserved. Spec No: DSAK2213 / 1201005724 Rev No: V.5A Date: 07/15/2017
KINGBRIGHT [ KINGBRIGHT CORPORATION ]
