Kingbor Technology Co.,Ltd
TEL:(86)0755-26508846 FAX:(86)0755-26509052
KB6282
Description
The KB6282 device is designed for LED display applications. This
CMOS device includes an input shift register, accompanying
data latches, and 16 MOS constant current sink drivers.
The CMOS shift registers and latches allow direct interfacing
with microprocessor-based systems. With a 3.3 or 5 V logic
supply, typical serial data input rates can reach up to 30 MHz.
The LED drive current level can be set by a single external
resistor, selected by the application designer. A serial data
output permits cascading of multiple devices in applications
requiring additional drive lines.
The KB6282 is available in a variety of 24-terminal packages:
QFN (package ES) and eTSSOP (LP), which have an exposed
thermal pad, and SOIC (LW). All packages are lead (Pb) free
with 100% matte tin leadframe plating.
Applications include the following:
Monocolor, multicolor, or full-color LED display
Monocolor, multicolor, or full-color LED signboard
Display backlighting
Multicolor LED lighting
LED Driver
16-Channel Constant-Current LED Driver
Features and Benefits
16 constant-current outputs, up to 88 mA each
LED output voltage up to 10 V
3.0 to 5.5 V logic supply range
Schmitt trigger inputs for improved noise
immunity
Power-On Reset (POR), all register bits = 0
Low-power CMOS logic and latches
High data input rate: 30 MHz
Output current accuracy: between channels
< ±3% and between ICs ±5%, over the full
operating temperature range
Internal UVLO and thermal shutdown (TSD)
circuitry
Packages:
24-contact QFN
4 mm × 4 mm × 0.75 mm
(Package ES)
24-pin TSSOP
with exposed thermal pad
(Package LP)
24-pin SOIC
(Package LW)
Not to scale
Typical Application
V
LED
10 F
OUT0
OUT15
OUT0
OUT15
10 F
SDI
CLK
Controller
LE
OE
SDI
CLK
LE
OE
SDO
VDD
V
DD
100 nF
GND
REXT
SDI
CLK
LE
OE
SDO
VDD
V
DD
100 nF
GND
REXT
KB6282
KB6282
IC 1
IC 2
Cascaded KB6282 devices
REV 1.1
1