07 | Keysight | M9260A PXIe Audio Analyzer Module – Data Sheet
Software: Drivers and Soft Front Panel (SFP)
Included in the M9260A software installer that you can download from Keysight.com are
the IVI-C, IVI-COM and LabVIEW G drivers. Also included in the installer is the intuitive
M9260A PXIe module soft front panel (SFP) software that you can use to configure and
control the PXIe module.
SFP features:
– Module maintenance allows self-test, module reset and firmware upgrades
– Audio generator settings allow sine-wave generation, with amplitude frequency and DC
offset adjustments. You can also select differential or pseudo-differential output, and
50 Ω or 600 Ω output impedance.
– Audio analyzer settings allow loopback control, and selection of differential or pseudo-
differential input, AC or DC input coupling, and 50 Ω, 600 Ω or 1 MΩ input impedance.
– Basic audio measurements: AC voltage, DC voltage, frequency, THD+N ratio, THD ratio,
SINAD and SNR
– Filter options: 20 kHz low-pass filter, 20 Hz high-pass filter, A-weight filter or no filter
Figure 4. M9260A PXIe module soft front panel interface
www.keysight.com/find/M9260A
KEYSIGHT [ Keysight Technologies ]
