15 | Keysight | N9923A FieldFox RF Vector Network Analyzer - Data Sheet
General Information (continued)
Description
Specification
Supplemental Information
Battery
10.8 V, 4.6 A–h
Lithium ion
Operating time
Charge time
3.5 hours (typical)
A fully discharged battery takes
about 1.5 hours to recharge to
80%, 4 hours to 100%
Discharge temperature limits1
Charge temperature limits1
Storage temperature limits
–10 to 60 ºC, ≤ 85% RH
0 to 45 ºC, ≤ 85% RH
–20 to 50 ºC1, ≤ 85% RH
The battery packs should be stored in an environment with low humid-
ity. Extended exposure to temperature above 45 ºC could degrade
battery performance and life
Data storage
Internal
Minimum 4 GB
Up to 1000 instrument states and trace
External
Supports USB 2.0 compatible memory devices; Supports microSD and
microSDHC memory cards
Display
6.5” transflective color VGA LED–
backlit
640 x 480 with anti–glare coating
Weight
2.7 kg (6.0 lbs) including battery
Dimensions (H x W x D)
292 x 188 x 72 mm
(11.5” x 7.4” x 2.8”)
Test ports
RF Port 1 or Port 2
Connector
Type–N, female
Impedance
50 Ω (nominal)
Damage level
Headphone Jack Connector
USB
> +23 dBm, > ±50 VDC
3.5 mm (1/8 inch) miniature audio jack
USB–A (2 ports)
Mini USB (1 port)2
LAN
Hi–speed USB 2.0
Hi–speed USB 2.0
100Base-T ONLY
RJ–45 connector
Used for SCPI programming
10Base-T is NOT supported
External
Programming
The built-in LAN interface and
firmware, support data transfer
and control via direct connection
to a LAN network.
1. Charge and discharge temperatures are internal temperatures of the battery as measured by a sensor embedded in the battery. The Battery screen
displays temperature information. To access the screen, select System ,
Service Diagnostics , and Battery
2. SCPI over USB is only available for N9923A with serial number prefix starting with MY5607/SG5607/US5607 and N9923A upgraded with Option
N9910HU-500.
KEYSIGHT [ Keysight Technologies ]
