05 | Keysight | FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz - Data Sheet
Cable and Antenna Analyzer and Vector Network Analyzer (continued)
Test port output specifications
High power in N991xA and N992xA refers to the target output power level of the analyzer when the Power Setting is set to High. As an
example, if you have a frequency sweep from 3 to 6.5 GHz, the analyzer will achieve the power level of -1 dBm across the band.
Low power level for N991xA and N992xA analyzers is a flat -45 dBm across the whole frequency band, and is the output of the analyzer
when the Power Setting is set to Low.
_____________________________________________________________________________________________________________________________
High power in the N995xA refers to the target output power level of the analyzer when the Power Setting is set to High. As an example,
if you have a frequency sweep from 39 to 46 GHz, the analyzer will achieve the power level to -2 dBm across the band.
Low power level for N995xA analyzers is the lowest power level that can be set and is the output of the analyzer when the Power Setting
is set to Low.
Max leveled power in the N995xA refers to the maximum leveled (flattened) power that can be achieved across the designated frequency
range. For example, if you have a frequency sweep from 32 to 44 GHz, and set up the analyzer to measure all four S-parameters, needing
both ports 1 and 2, the maximum power the analyzer can be set to is -6 dBm.
Test port output power (dBm), high power
N991xA, N992xA
30 to 300 kHz
Typical
Nominal
port 1 or port 2
port 1 or port 2
-11
—
> 300 kHz to 2 MHz
> 2 to 625 MHz
-3
-2
-2
-1
> 625 MHz to 3 GHz
> 3 to 6.5 GHz
1
3
-1
1
> 6.5 to 9 GHz
-2
0
-2.5
> 9 to 14 GHz
-4
> 14 to 18 GHz
-6
-4.5
> 18 to 23 GHz
-10
-8.5
> 23 to 26.5 GHz
-12
Typical
-11
Test port output power (dBm), low power
N991xA, N992xA
30 kHz to 26.5 GHz
Nominal
port 1 or port 2
-45 (flattened)
port 1 or port 2
—
KEYSIGHT [ Keysight Technologies ]
