Cable and Antenna Analyzer
Specification
Typical
90 minute
Supplemental Information
10 minute
warm up
warm up
Frequency Range
Option 104
Option 106
2 MHz to 4 GHz
2 MHz to 6 GHz
Frequency Reference (0 to 55 ºC)
Accuracy
±2 ppm
±2 ppm
Aging Rate
±1 ppm/yr
±1 ppm
±1 ppm/yr
±1 ppm
Temperature Stability
Frequency Resolution
2 MHz to 1.6 GHz
> 1.6 to 3.2 GHz
> 3.2 to 6 GHz
2.5 kHz
5 kHz
10 kHz
Resolution (Number of data points)
101, 201, 401, 601, 801, 1001, 1601, 4001, 10001
Custom number of points can be set using SCPI
Measurement Speed (Sweep time)
Return Loss 1, 1.75 to 3.85 GHz, 1001 points, Cal ON
DTF2, 0 to 500 ft, 601 points, Cal ON
0.4 ms/point (nominal)
0.5 ms/point (nominal)
Output Power (RF Out Port)
High
2 MHz to 4 GHz
< +8 dBm, +6 dBm (nominal)
< +7 dBm, +2 dBm (nominal)
> 4 to 6 GHz
Low (Typically 31 dB below high power)
2 MHz to 4 GHz
< –23 dBm, –25 dBm (nominal)
< –24 dBm, –25 dBm (nominal)
> 4 to 6 GHz
Immunity to interference signals
+16 dBm (nominal)
1.
2.
1.5 ms/pt; applicable for N9912A with serial number prefix <MY5607/SG5607/US5607 and N9912A not upgraded with Option
N9910HU-500
2.4 ms/pt; applicable for N9912A with serial number prefix <MY5607/SG5607/US5607 and N9912A not upgraded with Option
N9910HU-500
5
KEYSIGHT [ Keysight Technologies ]
